Showing posts with label SCGM. Show all posts
Showing posts with label SCGM. Show all posts

Sunday, September 29, 2019

Should investors "chase high" on SCGM Berhad at RM 1.18?


The share price of SCGM reached its peak in 2017 at approximately RM 3.20 before dropping 76%  to a low of RM 0.76 and recently rebounded 55% from its bottom to close at RM1.18 on 27 September 2019. So Is RM 1.18 a good entry price for Investor? To answer this question, we will do a comparison on its financial and share price for year 2017 & 2019 respectively. 

To be honest i think it is unfair to value SCGM based on net profit as it doesn't give a fair view on SCGM's operating profit due to its high depreciation incurred in 2019 through the factory expansion. Therefore, i would prefer to focus at its earnings before interest, tax and depreciation (EBITA)  and free cash flow to justify its core operating profit.

SCGM Financial in 2017 vs 2019 vs Q1 2020
  1. Although the net profit of SCGM shrink tremendously, its revenue continue to grow and expected to achieve a new high of RM 222 million in 2020. (there is definitely no issue in the top line as we are sure that the company keeps growing)
  2. As mentioned above, instead of looking at its net profit i would prefer to focus on its EBITA to have a better view of its operating profit. EBITA dropped from RM35 million (2017) to RM 18 million (2019), a drop of 48%. In Q1 2020, SCGM posted an earning before interest, tax & depreciation of RM 7.2 million. Assuming if SCGM is able to achieve this in the remaining 3 quarters, the full year EBITA would be RM 29 million. (At least we know that SCGM is still having positive core operating profits and do take note that its EBITA margin in Q1 2020 improved to 13.05% from 8.47% in 2019).
  3. Its interest and depreciation for 2020 is expected to be RM 5.4 million and RM 14.8 million respectively which is same as 2019, therefore i would safely say that the worst is over.  
  4. SCGM gearing ratio reduced from 64% in 2019 to 59% in Q1 2020. (As long as SCGM continue to reduce its debts, the interest expenses should reduce as well hence increase its free cash flow)
  5. Next we will look at its cash flow. The free cash flow generated by SCGM in 2017 is RM 77 million while in year 2018 & 2019, its free cash flow is negative due to capex on expanding its factory.  However we can see that its free cash flow is positive again at RM 9.5 million in Q1 2020. (Assuming if SCGM is able to maintain its free cash flow at this level for the remaining 3 quarters, SCGM is able to generate a free cash flow of RM 38 million. Currently SCGM has a bank borrowings of RM 96 million, with RM 38 million of free cash flow per year, SCGM is able to bring down its gearing ratio to a comfortable level in 3 to 5 years time).
  6. SCGM is a company that is willing to share its profit with its share holder as it used to have a dividend payout ratio of 60 - 70%. However in recent years, due to its tight cash flow and lower profit, dividend drop massively. (Assuming if SCGM is paying 0.25 sen of dividend per quarter, full year dividend paid will be 1sen which is equivalent to a yield of 0.85% at the price of RM 1.18. SCGM will not be a dividend counter until it pair down its debts).\

Now back to the questions on should investors "chase high" on SCGM Berhad at RM 1.18? 

In point 2, i did an assumption that the full year EBITA for 2020 would be RM 29 million up from RM 18 million in 2019, an increase of 61%. Share price of SCGM had rebounded from the rock bottom of RM 0.76 to RM 1.18, an increase of 55% which means the current share price is reflecting its earning for the remaining 3 quarters in 2020.  

With this i conclude, if SCGM is able to achieve an EBITA of RM 29 million in 2020, its share price should be somewhere RM 1.20 - RM1.30 to be fair.

However there are more that we should look at for future share price movement.

Below is some sharing by 笔随意走

SCGM AGM 简报 (Sept 24,19)
- 自从搬迁到新厂后,总产能达到每年6.2万 吨 (62.6million kg)
-目前的产能使用率大概在40-50%, 最佳舒适使用率预测是70%左右,希望可以在此财政年FY2020 第四季度可以达到(明年年4月之前)
- 三分之一的营业额来自出口,区域则来自本地
- 可生物降解(biodegrable )产品目前是占了少于 10%的生意量,原因是 太贵,市场不接受
- 原料(resin)占了生产成本的大概60% (原料品种:PET, PP, PS)
- 原料供应商源自本地
- 原料吨货量大概 1.5 个月 (属于最佳时限,不会卡cash flow)
- 目前原料低价是好事(自从四月开始),凡生产的产品任何起跌价都会有lag effect ,不会马上反映出来
- 贸易战受惠 订单转移
- 受惠于本地食品行业的蓬勃发展(最近流行打包,foodpanda 那些,有助提升产品需求)
- 政府减少塑料产品使用政策的影响: 短期内还没有真正可以取代plastic 的原料,plastic依然是消费者首选
- 盈利逐渐恢复,上个财政年出现亏损因为新建筑物和机械开始减值,搬厂额外开销,原料价格高企
- 资产折旧 建筑物:摊平二十年,一年比以前多RM 2mil ,至于机械则为10年




Tuesday, March 26, 2019

SCGM Q3 2019

  • SCGM reported a loss making quarter for the first time since 2009 even though its revenue grow by 6%.
  • Profit margin reduced from 11.5% in 2018 to 3.9% in 2019 due to higher depreciation, higher raw material prices, increased finance costs, and higher operating expenditure incurred in both the old and new plants in the transition period. (expect to see the operating expenditure to reduce in next 2 quarters after the new factory is in full operation)
  • Finance cost continue to rise to 4 million in 3 quarters which accounted 56% of its operating profit.

  • Inventories increased by 27% (signify that the business is in line with its growth plan)
  • Gearing ratio increased from 0.47 in 2018 to 0.69 in 2019 (borrowing increased from RM84 million to RM123 million). 

  • Depreciation and finance cost accounted for RM14.8 million vs profit before tax of RM3.1 million (that is almost 4 times of its profit)
  • Cash flow of SCGM worsen as the company sort of survive based on borrowings. 
  • Money spend in investing reduced meaning they can now focus on their operations. 

  • Export sales remain flat while local sales grow by 5.5%. 

Future Prospect
  • Demand for environmentally-friendly packaging solutions is on the rise both locally and globally due to higher social awareness. 
  • The Group is also in the midst of moving operations to its new Kulai plant, with the factory expected to be fully commissioned in the fourth quarter ending 30 April 2019. 
Comments
  • Although the company is making a loss of 0.36 sen per share for the quarter, it is still declaring 0.25 sen of dividend per share. (the company is basically paying the dividend with bank borrowings)
  • Wait for sign of recovery in their operation before enter. 




Saturday, March 23, 2019

SCGM Berhad (AR 2018)

Corporate Profile


  • 34 years in business and listed on bursa malaysian in 2008
  • Plastic solution for F&B, electronic and medical industry
  • Obtain eco label mark from SIRIM for "Benxon" brand
  • Currently has 2 manufacturing plant - Kulai (Johor -  Grow its 170,000 sqft facilities in 2009 to 600,000 sqft in 2017) & Banting (Selangor - setup in 2017 with 47,000 sqft and capacity of 5 million KG)
  • Exclusive provider of decompose-able lunch box & food trays for 29th SEA games and 9th Asean Para games (good for their brand awareness and exposure)
Financial Highlight


  • Revenue doubled from 2014 - 2018 (main reasons being growth in Malaysia market where sales increase from 70 million in year 2016 to 136 million in year 2018)
  • Interest expenses and gearing remain at a healthy level (Gearing in year 2018 being 0.45)
  • Main reasons for EPS to drop significantly from 2016 is due to increase in number of shares
  • F&B remain as their major segment which contribute 80% of their revenue. 
  • Generous with its dividend payout with about 70% of its profit are used to pay dividend (minimum 40% dividend payout policy)
  • Cash reduced significantly due to the construction of its Kulai manufacturing plant.
  • Depreciation expenses increased by 3 fold from 4.7 million in year 2014 to 11.2 million in year 2018 (due to its new Kulai factory)
Operation Highlights

  • The thermo-form industry in Malaysia continued its uptrend during the year, with the ban on polystyrene packaging implemented in Klang Valley and Johor. 
  • New government’s support in banning the use of polystyrene packaging nationwide, which could become a catalyst for the Group to enter next high growth phase.
  • The Group also doubled our efforts in expanding our customers base, both locally and regionally. These initiatives translated into the Group gaining 138 new local customers and 13 new foreign customers during in year 2018, comprising vendors, manufacturers and retailers. We also penetrated the African market for the first time by securing a distributor for our products in Nigeria. (Obviously this is due to the ban of polystyrene where most local user will switch to SCGM for their eco friendly product)
Financial Review
  • Increasing crude oil prices during the year inevitably led to higher prices of resin, which is a key raw material in our products.
  • The construction of the new Kulai manufacturing plant and acquisition of machinery necessitated higher borrowings, and led to the corresponding surge in finance costs in FY2018 to RM1.6 million from RM0.7 million a year ago. Hence, the Group’s strong sales was tempered by all these factors, leading pre-tax profit to drop 28.1% to RM19.1 million, compared to RM26.6 million in the previous year. Net profit also followed in tandem, declining 28.7% to RM16.4 million in FY2018, versus RM23.0 million previously
Challenges

  • Increase in global crude oil price
  • Labour shortage and higher labour cost
Growth Prospect
  • The new Kulai plant will contain technologically advanced machinery, which will reduce our reliance on labour and increase production capacity. 
  • Together with machinery which will be relocated from the existing factory, the Group’s total extrusion capacity will expand to 67.6 million kg per year from 41.0 million kg per year currently, inclusive of the facility in Klang Valley.
  • Aim to be a leading thermo-form plastic packaging providers in the region.  

As at 2nd quarter of 2019
  • Revenue were historical new high in 2Q2019 (RM57million) however margin remain low and there is no sign of recovery (2.3% in year 2019 vs 10.3% in year 2018)
  • Gearing ratio remain remain high at 0.62 (increase from 0.45 in year 2018) 
  • Interest expense for 1Q2019 is RM1.2 million, 2Q2019 is RM1.38 million. (This is a huge concern as finance cost constitute 90% of its net profit)

  • Depreciation remain high at 7 million for 2 quarters as compared to 11 million in year 2018. 

  • Export sales slow down in in 2019 as compared to 2018. However the drop was offset by the gain in local sales. 
  • The lower Profit before Tax was due to higher resin prices, higher finance costs, higher utilities expense, higher depreciation charges and higher labour cost incurred during the current quarter.
  • The transition of the Group’s main operations from the old premises to the new headquarters is currently midway, and is targeted to operate fully from the new base in the third quarter ending 31 January 2019.The Group will strive to achieve better financial performance in the coming financial quarters when the new Kulai plant is commissioned.
Strength
  • Impairment on trade receivable remains low which is less than 1%. (meaning their clients are mainly 好脚)
  • 80% of their product are for F&B such as vegetables, fruits and confectionery (these products are actually defensive in nature)
  • Plans to dispose the old Kulai plant for RM70 million to pair down their debts (theirs bank borrowing up to date was RM110 million, if the above plan is being materialized, gearing will reduce from 0.62 to 0.19 and this will greatly reduce its interest expense)
  • The new automated plant at Kulai utilization rate is currently 50%, with the increased automation as well as larger power supplies, there will be lots of room to achieve greater economies of scale and margin improvements going forward.
  • The new Kualai Plant actually double up its production capacity from 36 million KG/annum to 61 million KG/annum. 
  • The new Kulai plant actually build on the concept of industry 4.0 which is fully automated, from raw material -> thermoforming -> packaging through the conveyor belt. A large scale production basically only requires one person to operates. (展望未来,李福成说,对餐盒包装的市场需求甚大,因此将生产迁移至新工厂,新工厂的面积约19英亩,面积比旧工厂多出1倍左右,不过,员工仍维持500人,无需增加人手。)
  • It also complies with green building index so basically there is no need to turn on lights during the day (utilities saving). 
  • Reinvestment allowances, which can offset up to 70% of taxable income and has not yet kicked-in despite the commencement of operations at its new plant as current earnings are still not favourable (not too sure how long is this reinvestment allowance).
  • SCGM product are in line with SIRIM environment requirement which is decompose-able in 21 days. 
  • Regardless of tight cash flow, Dato Lee Hock Seng (Chairman cum founder) mention that dividend payout ratio will maintain at least 40% of its profit and would strive to do better. 
  • Ability to customize the plastic box according to clients' requirements. 
  • Ability to mitigate the cost increment to their clients. 


Weakness
  • Resin cost constitute 70% of its operating cost. 
  • Margin remain compressed due to high depreciation, high finance cost, high raw material cost. 
  • Price war between peers on the lunch box. 
  • Can the company deliver what it mentioned above? In term of new factory utilization rate as well as maintaining the labour cost when production double. 

Valuation @ 1.14
  • Dividend yield remain low (assuming the company is giving out 0.5sen every quarter, that is 2 sen per year, at 1.14, the yield is only 1.7%)
  • Highest PE in the industry (current PE is 26). Bpplas (PE9.8), Tguan (PE7.6), Scientx (PE15.9)
  • SCGM managed to deliver higher than peers gross profit margin (> 20%) and net profit margin (>10%). Industry net profit margin are usually below 10%
  • After all the automation and increment in production capability, will SCGM gross profit and net profit margin shine again? 
Technical Analysis



SCGM are still forming lower low after the share price plunge in 2017, however the room for new low are shrinking. At 1.14, the price is still below its 20MA and there is no sign of recovery be it fundamentally or technically.



Power Root Berhad (Annual Report 2019 & Q4 2020)

Company Background Pwroot is an instant drinks manufacturer with different brands to target different customers.  Ah Huat instan...